Complete Pre-Greased Hub-Electric Drum Assembly, 7K Capacity Per Pair, 8 lug on 6.5" Bolt Pattern with 9/16" Studs. Fully assembled with bearing races and seals pressed in, pre-greased and ready to bolt on.
 
*Compatible with Dexter, Lippert and most other axle brands utilizing a #42 spindle, Fits 5200 lb, 6,000 lb and 7000lb Axles with 8 ea 9/16" Studs.
 
Actual brand may vary based on availablilty.
 
Items in Kit:
• 1ea 25580 Inner Bearing (1.75" ID)
• 1ea 14125A Outer Bearing (1.25" ID)
• 1ea 25520 Inner Race (Already Pressed In) 3.265" OD
• 1ea 14276 Outer Race (Already Pressed In) 2.717" OD
• 1ea 10-36 Grease Seal (2.25" x 3.376")
• 1ea 21-39 Grease Cap (2.72" OD) For regular grease type spindles )
• 1ea 21-43-1 Grease Cap (2.72" OD) ( for EZ Lube Zerk type spindles )
• 1ea 85-1 Grease Cap Plug ( for EZ Lube Zerk type spindles )
• 8 ea 9/16" - 18 Coned Wheel Nuts
• 1ea 8 on 6.5" Hub & Drum Pregreased For Convenience
• Spindle Nuts ( including Castle type )
• Spindle Nut Retainer
• Round and D style Washers
• Cotter pin
• 1ea 8 on 6.5" Hub & Drum with 9/16" Studs Pregreased and Fully Assembled.
• 3,500 lb Capacity Per Hub
• Use with a 12" x 2" electric brake
 
• How to measure bolt ( Lug ) pattern.
To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 6 on 5.5" would mean 6 studs with 5-1/2” center-to-center bolt circle diameter. See diagram above.