Complete Pre-Greased Hub-Electric Drum Assembly, 6K Capacity Per Pair, 6 lug on 5.5" Bolt Pattern with 2.125" id inner seal. Fully assembled with bearing races and seals pressed in, pre-greased and ready to bolt on.
*Compatible with Dexter, Lippert and most other axle brands utilizing a #42 spindle, Fits both 5200 lb and 6,000 lb Axles with a 2.125" id inner seal.
Actual brand may vary based on availablilty.
* IMPORTANT! Check your inner seal diameter before ordering as there are two common options, either 2.125" or 2.25" id inner seals found on most 5200 lb - 6000 lb axles.
*This will upgrade 5200 lb axle electric drums to 6000 lb electric drums that include the larger #15123 outer bearing.
Items in Kit:
• 1ea 25580 Inner Bearing (1.75" ID)
• 1ea 15123 Outer Bearing (1.25" ID)
• 1ea 25520 Inner Race ( Already Pressed In ) 3.265" OD
• 1ea 15245 Outer Race ( Already Pressed In ) 2.441" OD
• 1ea 10-10 Grease Seal 2.125" x 3.376" ( Already Pressed In )
• 1ea 45896 Grease Cap (2.44" OD)
• 1ea 21-42-1 Grease Cap (2.44" OD)
• 1ea 85-1 Grease Cap Plug for EZ lube Grease Zerk type spindles.
• 6 ea X1023R 60 degree Coned Wheel Nuts
• Spindle Nuts ( including Castle type )• Spindle Nut Retainer
• Round and D style Washers
• Cotter pin
• 1ea 6 on 5.5" Hub & Drum Pregreased and Fully Assembled.
• 3,000 lb Capacity Per Drum
• Use with a 12" x 2" electric brake
• How to measure bolt ( Lug ) pattern.
To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 6 on 5.5" would mean 6 studs with 5-1/2” center-to-center bolt circle diameter. See diagram above.